Logo Branding Packages

stokes-sign-company-colonial-post-assembly-graphic.jpg

Stokes Colonial Post Installation
Instructions

  1. Determine direction sign is to hang and install ground anchor with angle and bolts pointing in direction sign is to hang.

  2. Drive ground anchor into ground. A block of wood can be used to strike, if you wish. Anchor should be straight and driven all the way into ground. If ground is extremely hard or frozen, making a preliminary hole is recommended.

  3. Slip post over the ground anchor and secure with two lock washers and wingnuts as shown.

  4. Fasten cross arm post with bolt, lock washer and wingnut. 

  5. Insert eyebolts thru cross arm as shown. Install the two plastic rider holders if top riders are used and fasten with nut.

  6. Stainless steel safety pin clips attach sign to eyebolts.

Removing Post From Ground

When removing sign from the ground, disassemble first. Remove ground anchor by striking on each side several times to loosen. (In extreme conditions a slight prying may be necessary.)

Ground anchors will last longer if care is used in removing. Replacement ground anchors are available.

Please wear eye protection.

Austin Package
Texas Package
Suggested Font Names (not font files) to use with Logo
-
+
Color Palette
-
+
Branding Book
-
+
High Resolution JPEG
-
+
Vector File (PDF)
-
+
Revisions
5
7
Black and White
+
+
Full Color
+
+
PNG
+
+
JPEG
+
-
High Resolution (Rasterized) PDF
+
-
Research
+
+
Logo Design (3-4 Original Concepts)
+
+